Tired of Painting?

No need to worry with our expert Wall Coating service

Protect the walls of your home with our range of exterior wall coating. The application of our coatings provide a protective membrane, shielding your masonry from the elements and preventing damp whilst enabling your walls to breathe.

If you are tired of painting your walls, then our expert wall coating service is for you.

All wall coating is also available in a wide range of colours and finishes.

Wall coating is for you if your walls suffer from any of the following:

  • Cracked render

  • Penetrating damp

  • Flaking and blistering

  • Spalling brickwork

  • Mould and algae

  • Blown render or pebbledash

  • Eroding mortar or painting

  • Constant maintenance of discoloured paint

Put Your Trust in Us

What our customers are saying



The Wall Coating Process Explained

Stage One - Cleaning 

All surfaces must be cleaned thoroughly by using our specialist high powered industrial jet washers. All traces of mould, grime and other contaminants are washed away, along with any existing delaminating paintwork. This will help to further identify any damaged brickwork, render, pebbledash, masonry etc. A fungicidal wash solution is then applied to ensure re-growth of any spores is prohibited in the years to come.

Stage Two - Repair & Restoration

Once problem areas have been identified, our experienced teams can begin to repair any defective areas. Defective brickwork is made good and all cracks are chased out. Fibre reinforced polymer cements are used to ensure a perfect bond. Great care is taken to ensure any repair work undertaken is blended in as best as possible. All freshly repaired areas are then bagwashed with a polymer modified mortar to ensure any small holes are filled and any imperfections are eliminated.

Stage Three - Masking Up

Stage Four - Premier Coat / Bonding Coat

A special primer coat is then applied to the walls to ensure perfect cohesion of the final coating to the substrate. This helps to form an incredibly strong final coat once the top coat has been applied.

Stage Five - Top Coat Application

Our teams then apply the final colour coat using specialist industrial spray equipment. The coating is applied under high pressure and the complete system is up to 20 times thicker than conventional paint, leaving a beautiful uniform finish that will last up to 30 years, thus eliminating the need to repaint every 2-3 years! We then leave your property in a clean and tidy condition, taking all materials and debris with us, leaving you to admire your new looking property!